Forgot to write down dilution ratio for your all purpose cleaner? Forgot how much clay mask to use? Read on.
Dilute at 1:28 ratio with water for general cleaning. Use less water for a more concentrated solution.
Bac-Out stain and odor remover
Spray on affected area and let sit 10 minutes or longer before washing.
Dissolve 3-4 tbsp in hot bath water.
Mix 1 tbsp of clay with 1 tsp water to form the mask. Spread on skin and wash off after 20 minutes.
If your machine has 2 washer soap cups, use 1/2 tbsp in each.
If your machine has 1 washer soap cup, use 1 tbsp.
If you have hard water or a heavy load, use 2 tbsp. If your water is very hard, try a diluted white vinegar rinse (2:1 with water) in the rinse compartment.
Place 1/2 tsp of scrub in the palm of your hand and drip just a few drops of water onto the scrub to form a paste. Massage onto face and rinse clean.
For regular washing machines, use 2 tbsp per load.
For high-efficiency machines, use 1 tbsp per load.
For regular washing machines, use 1 tbsp per load.
For high-efficiency machines, use 1/2 tbsp per load.
For laundry booster, use 2 tbsp per load.
For carpet cleaning, dissolve 1/4 - 1/2 cup oxygen bleach in hot water. Test in an inconspicuous corner before using on the whole carpet.
For grout, dissolve a few tbsp of oxygen bleach in warm water. Rub onto grout and let sit for at least 15 minutes.